1st International Electronic Conference on Applied Sciences

Part of the International Electronic Conference on Applied Sciences series

Optics, Lasers, Nanotechology, Applied Nanosciences, Energy, Materials, Chemistry, Acoustics, Vibrations, Applied Biosciences, Bioengineering, Environmental and Sustainable Science, Applied Physics, Computing, Artificial Intelligence, Applied Dentistry

Thank You for Participating

**All participants of ASEC 2020 are welcome to submit the extended work to the Applied Sciences.**

Welcome from the Chair

Dear Colleagues,

It is my pleasure to invite you to join the 1st International Electronic Conference on Applied Sciences (ASEC 2020) that is hosted online by https://sciforum.net/conference/ASEC2020.

Two decades have passed since the first year of the 21st century. The speed of the development of sciences and technologies are growing ever faster today than in the previous century. The field of science is expanding, and the structure of science is becoming ever richer. Because of this expansion and fine structure growth, researchers may lose themselves in the deep forest of the ever-increasing frontiers and subfields being created. This open-access journal, Applied Sciences, was started to help all scientists conduct their own research into the growth of these frontiers by breaking down barriers and connecting the many subfields in order to cut through this vast forest. These functions will allow researchers to see these frontiers and their surrounding (or quite distant) fields and subfields, and give them the opportunity to incubate and develop their knowledge even further with the aid of this multi-dimensional network.

ASEC 2020 aims to promote and advance the exciting and rapidly changing field of all aspects of applied sciences. Topics of interest include, but are not limited to:

ASEC 2020 will enable you to share and discuss your most recent research findings with the worldwide vibrant community of scientists and engineers in the field.

ASEC 2020 will make your presentation accessible to hundreds of researchers worldwide, with the active engagement of the audience in question and answer sessions and discussion groups that will take place online.

Submitted abstracts will be reviewed by the conference committee. The authors of accepted contributions will be invited to produce an extended abstract for the conference proceedings along with a slide presentation of their work. Following the conference, outstanding contributions will be invited to be submitted for publication in Applied Sciences (https://www.mdpi.com/journal/applsci).

ASEC-1 is a new and exciting experience for me that I believe that it is a taste of the future. ASEC will revolutionize dissemination in the field with a brand-new tool for sharing research in an online environment that will preserve the same standards and structure of traditional conferences but will be more inclusive by breaking the cost and time barriers that prevent participation in remote events. ICTs are shaping our world; let’s make them change the way we communicate science!

I hope you will join us and present your work at ASEC 2020, and be part of this thriving online experience.

Kind regards,

Prof. Dr. Takayoshi Kobayashi

Chair of 1st International Electronic Conference on Applied Sciences

Conference Secretariat

Ms. Jennifer Li
MDPI Branch Office, Beijing
E-mail: asec2020@mdpi.com

Ms. Hobby Hou
MDPI Branch Office, Beijing
E-mail: asec2020@mdpi.com

Call for Paper

The 1st International Electronic Conference on Applied Sciences will be held on 10–30 November 2020. ASEC 2020 aims to promote and advance the exciting and rapidly changing field of applied sciences. All proceedings will be held online at https://sciforum.net/conference/ASEC2020.

Topics of interest include, but are not limited to:

ASEC 2020 is a virtual conference sponsored by Applied Sciences. Participation is free of charge for authors and attendees. Accepted papers will be gathered in the proceedings of the conference. Selected extended versions of the papers will be published in a Special Issue of Applied Sciences and undergo full peer review (ISSN 2076-3417; Impact Factor: 2.474 (2018)) with a 10% discount on the article processing charge. ASEC 2020 offers you the opportunity to participate in this international, scholarly conference without the concerns or expenditure of travel—all you need is your computer and access to the internet. We would like to invite you to attend this conference and present your latest work.

Abstracts (in English) should be submitted online by 28 October 2020 at https://sciforum.net/conference/ASEC2020. For accepted abstracts, the proceedings can be submitted by 31 October 2020. The conference will be held on 10–30 November 2020.

Paper Submission Guidelines

For information about the submission procedure and preparation of a full presentation, please refer to the "Instructions for Authors".

Time Schedule

Abstract Submission: 28 October 2020
Notification of Acceptance: 30 October 2020
Paper Submission Deadline: 31 October 2020
Conference Open: 10–30 November 2020

We thank you in advance for your attendance of this conference and look forward to a stimulating exchange.

Conference Chairs

Prof. Dr. Takayoshi Kobayashi

Advanced Ultrafast Laser Research Center, The University of Electro-Communications, Tokyo, Japan

Conference Committee

Prof. Dr. Ting-Chung Poon

Bradley Department of Electrical and Computer Engineering, Virginia Tech, Blacksburg, Virginia 24061, USA

Prof. Dr. Philippe Lambin

Physics Department, University of Namur, Rue de Bruxelles 61, B-5000 Namur, Belgium and Physics & Technology Department, Higher Pedagogical Institute, Bukavu, Democratic Republic of Congo

Prof. Dr. Frede Blaabjerg

Department of Energy Technology, Aalborg University, Aalborg 9220, Denmark

Prof. Dr. Amit Bandyopadhyay

School of Mechanical and Materials Engineering, Washington State University, Pullman, WA 99164-2920, USA

Professor Sam Adeloju

Faculty of Science, Charles Sturt University, Wagga Wagga, NSW 2650, Australia

Prof. Dr. Dimitrios G. Aggelis

Department of Mechanics of Materials and Constructions, Vrije Universiteit Brussel, Pleinlaan 2, Brussels 1050, Belgium

Prof. Dr. Roger Narayan

Department of Materials Science and Engineering, North Carolina State University, Raleigh, USA

Prof. Dr. Dibyendu Sarkar

Stevens Institute of Technology, Department of Civil, Environmental, and Ocean Engineering, Hoboken, New Jersey, United States

Prof. Dr. Nikolaos Vassiliou Sarlis

Section of Condensed Matter Physics, Department of Physics, National and Kapodistrian University of Athens, Panepistimiopolis, Zografos 15784, Greece.

Prof. Dr. Andrea Prati

Department of Engineering and Architecture, University of Parma, Italy

Prof. Dr. Carlos A. Iglesias

Intelligent Systems Group, Universidad Politécnica de Madrid, 28040 Madrid, Spain

Prof. Dr. Gianrico Spagnuolo

Department of Neuroscience, Reproductive and Odontostomatological Sciences University of Naples "Federico II", Naples, Italy

Sessions

A. Optics and Lasers
B. Nanotechnology and Applied Nanosciences
C. Energy
D. Materials
E. Chemistry
F. Acoustics and Vibrations
G. Applied Biosciences and Bioengineering
H. Environmental and Sustainable Science and Technology
I. Applied Physics
J. Computing and Artificial Intelligence
K. Applied Dentistry

Instructions for Authors

Submission

Submissions should be submitted by the authors online by registering at https://sciforum.net/conference/ASEC2020, and using the “Submit Abstract” function once logged into system.

Scholars interested in participating with the conference can submit their abstract (about 200–250 words covering the areas of manuscripts for the proceedings issue) online at this website up to 28 October 2020.
The Conference Committee will conduct a pre-evaluation, based on the submitted abstract, of whether the contribution from the authors of the abstract will be welcome for the 1st International Electronic Conference on Applied Sciences. All authors will be notified by 30 October 2020 about the acceptance of their abstract.
If the abstract is accepted for this conference, the author is asked to submit the manuscript optionally along with a PowerPoint and/or video presentation of his/her paper (only PDF), up to the submission deadline of 31 October 2020.
The conference proceedings papers and presentations will be available at https://sciforum.net/conference/ASEC2020 for discussion during the time of the conference, 10–30 November 2020, and will be published in Journal Proceedings.
The open access journal Applied Sciences will publish a Special Issue of the conference and accepted papers will be published in the proceedings of the conference itself. After the conference, the Conference Committee will select manuscripts that may be included for publication in the Special Issue of the journal Applied Sciences (the submission to the journal is independent from the conference proceedings and will follow the usual process of the journal, including peer-review, APC, etc.).

Proceedings Paper

Manuscripts for the proceedings issue must have the following organization:

First page:

Title
Full author names
Affiliations (including full postal address) and authors’ e-mail addresses
Abstract (200–250 words)
Keywords
Introduction
Methods
Results and Discussion
Conclusions
(Acknowledgements)
References

Manuscripts should be prepared in MS Word or any other word processor and should be converted to PDF format before submission. The publication format will be PDF. The manuscript should be at least 3 pages (incl. figures, tables, and references) and should not exceed 6 pages.

Presentation Slides

Authors are encouraged to prepare a presentation in PowerPoint or similar software, to be displayed online along with the manuscript. Slides, if available, will be displayed directly in the website using the proprietary slides viewer at Sciforum.net. Slides can be prepared in exactly the same way as for any traditional conference where research results can be presented. Slides should be converted to PDF format before submission so that we can easily and automatically process them for online display.

Video Presentations

Besides their active participation within the forum, authors are also encouraged to submit video presentations. The video should be no longer than 20 minutes and be prepared in one of the following formats:

MOV
MPEG4
MP4
AVI
WMV
MPEGPS
FLV

Submission of Manuscripts

Submission: Manuscripts should be submitted online at https://sciforum.net/conference/ASEC2020 by registering and logging in to this website.

Accepted File Formats

MS Word: Manuscript prepared in MS Word must be converted into a single file before submission. When preparing manuscripts in MS Word, the 1st International Electronic Conference on Applied Sciences Microsoft Word template file (see download below) must be used. Please do not insert any graphics (schemes, figures, etc.) into a movable frame which can superimpose the text and make layout very difficult.
LaTeX: Manuscripts prepared in LaTeX must be collated into one ZIP folder (include all source files and images so that the Conference Secretariat can recompile the submitted PDF). When preparing manuscripts in LaTeX, please use the 1st International Electronic Conference on Applied Sciences LaTeX template files.

1st International Electronic Conference on Applied Sciences Microsoft Word template file and LaTex template file

ASEC2020_Word_template.docx
ASEC2020_Latex_template.zip

Manuscript Preparation

Paper Format: A4 paper format, the printing area is 17.5 cm × 26.2 cm. The margins should be 1.75 cm on each side of the paper (top, bottom, left, and right sides).
Paper Length: The conference proceedings paper should not be longer than 6 pages. The conference manuscript should be as concise as possible.
Formatting/Style: The paper style of the journal Proceedings should be followed. You may download the template file to prepare your paper (see above). The full titles of the cited papers must be given. Reference numbers should be placed in square brackets [ ], and placed before punctuation; for example [4] or [1–3], and all the references should be listed separately and as the last section at the end of the manuscript.
Authors List and Affiliation Format: Authors’ full first and last names must be given. Abbreviated middle name(s) can be added. For papers written by various contributors, a corresponding author must be designated. The PubMed/MEDLINE format is used for affiliations: complete street address information including city, zip code, state/province, country, and email address should be added. All authors who contributed significantly to the manuscript (including writing a section) should be listed on the first page of the manuscript, below the title of the article. Other parties who provided only minor contributions should only be listed under Acknowledgments. A minor contribution might be a discussion with the author, reading through the draft of the manuscript, or performing English corrections.
Figures, Schemes, and Tables: Authors are encouraged to prepare figures and schemes in color. Full color graphics will be published free of charge. Figure and schemes must be numbered (Figure 1, Scheme I, Figure 2, Scheme II, etc.) and an explanatory title must be added. Tables should be inserted into the main text, and numbers and titles for all tables supplied. All table columns should have an explanatory heading. Please supply legends for all figures, schemes, and tables. The legends should be prepared as a separate paragraph of the main text and placed in the main text before a table, figure, or scheme.

Potential Conflicts of Interest

It is the authors’ responsibility to identify and declare any personal circumstances or interests that may be perceived as inappropriately influencing the representation or interpretation of clinical research. If there is no conflict, please state here “The authors declare no conflict of interest”. This should be conveyed in a separate “Conflict of Interest” statement preceding the “Acknowledgments” and “References” sections at the end of the manuscript. Financial support for the study must be fully disclosed under the “Acknowledgments” section.

Copyright

MDPI, the publisher of the Sciforum.net platform, is an open access publisher. We believe that authors should retain the copyright to their scholarly works. Hence, by submitting a Communication paper to this conference, you retain the copyright of your paper, but you grant MDPI the non-exclusive right to publish this paper online on the Sciforum.net platform. This means you can easily submit your paper to any scientific journal at a later stage and transfer the copyright to its publisher (if required by that publisher).

List of accepted submissions (75)

Id	Title	Authors	Presentation Video	Poster PDF
sciforum-033307	Decomposition of Bromocresol Green Using Non-Thermal Atmospheric Pressure Plasma Jet Ziba Matinzadeh , Farhad Shahgoli , Hamed Abbasi , Mahmood Ghoranneviss , Mohammad K. Salem Submitted: 18 Jul 2020 Abstract: Show Abstract	Ziba Matinzadeh , Farhad Shahgoli , Hamed Abbasi , Mahmood Ghoranneviss , Mohammad K. Salem	N/A	N/A	Show Abstract
This research study aims to decompose bromocresol green (C₂₁H₁₄Br₄O₅S) using direct irradiation of non-thermal atmospheric pressure plasma jet. The absorbance spectra of the bromocresol green solution have been measured as well as its electrical conductivity and also its pH before and after different time durations of irradiation. The results showed that the lengths of conjugated systems in the molecular structure of bromocresol green decreased, and the bromocresol green solution was decolorized as a result of the decomposition of bromocresol green. This result indicates that cold atmospheric pressure plasma jet irradiation is capable of decomposing and can also be used for water purification.
sciforum-033316	Non-destructive evaluation of internal sulphate attack in cement-based materials applying non-linear ultrasonic techniques José Marcos Ortega , Marina Miró , Pedro Poveda , Antonio José Tenza-Abril , Jaime Ramis , Miguel Ángel Climent Submitted: 19 Jul 2020 Abstract: Show Abstract	José Marcos Ortega , Marina Miró , Pedro Poveda , Antonio José Tenza-Abril , Jaime Ramis , Miguel Ángel Climent			Show Abstract
One of the most aggressive attacks to which cement-based materials can be exposed is that produced by sulphate. During this attack expansive products are formed, causing volumetric strains in hardened materials, which brings microcracking and the reduction of their strength and durability. The use of non-destructive techniques for characterizing the microstructure and service properties of cement-based materials has become an important research field. Particularly, they can also be useful for following the development of deleterious processes which can affect those materials. Among them, non-linear ultrasonic (NLU) techniques have shown to be useful for evaluating the material degradation. In recent studies, they have been used for detecting cracks due to steel corrosion in concrete structures. NLU technique is based on the fact that the non-linear interaction of ultrasound with cracked materials generates higher acoustic harmonics. The aim of this work is to study the possibility of using the NLU technique for the non-destructive evaluation of damage in cement-based materials due to sulphate attack. Cement pastes were prepared using ordinary Portland cement to which an appropriate amount of calcium sulphate 2-hydrate was added during the setting for producing an internal attack in the samples. Furthermore, its effects have been followed with mercury intrusion porosimetry, scanning electron microscopy, linear ultrasonic technique, X-ray diffraction and X-ray fluorescence. The expansion and the mechanical strengths of the samples were also determined. The preliminary results indicate that the NLU technique could be useful for studying the development of sulphate attack, complementing the information provided by other techniques.
sciforum-033597	Synteza kompozytów polimerowych o właściwościach luminescencyjnych Mateusz Gargol , Beata Podkościelna Submitted: 24 Jul 2020 Abstract: Show Abstract	Mateusz Gargol , Beata Podkościelna	N/A	N/A	Show Abstract
This study presents the synthesis and properties of new polymeric materials in form of composites with photoluminescent filler. As a main monomer a bisphenol A glycerolate (1 glycerol/phenol) diacrylate (BPA.DA) was used. In order to obtain the appropriate viscosity of the polymerization system, three active diluents (methyl methacrylate, N-vinyl-2-pyrrolidone and 2-hydroxyethyl methacrylate) were applied. In role of photoluminescent dopant the copolymer of N-vinyl-2-pyrrolidone with 2,7-(2-hydroxy-3-methacrylo-yloxypropoxy)naphthalene, in form of powder was adopted. The compositions were prepared with an increasing amount of filler: 0, 0.5, 1, 2, 5, 10% w/w. After polymerization reaction, samples which generating of green-yellow light by excited by UV radiation were obtained. The influence of the increasing luminescent filler content on the selected properties of the composites was evaluated. The thermal and mechanical behaviors of composites were determined by means of differential scanning calorimetry (DSC), and Shore D hardness. Moreover the chemical structure of polymeric materials were confirmed by the attenuated total reflectance Fourier transform infrared spectroscopy (ATR/FT-IR) method. These results shown that the incorporation of the photoluminescent filler into structure of compositions can be interesting method of synthesis e.g. stable and functional polymeric coatings or optical fiber sensors.
sciforum-034510	Effect of soil loading/unloading on its acoustic behavior Vladimir Frid , Stelios Potirakis , Semen Shulov Submitted: 04 Aug 2020 Abstract: Show Abstract	Vladimir Frid , Stelios Potirakis , Semen Shulov	N/A		Show Abstract
The aim of the study was to understand the changes of p-wave velocity and acoustic emission (AE) as a result of soil loading/unloading. The soil was dune sand (poorly graded - SP index and three its fractions as follows: 2.36-0.6 mm, 0.6-0.3mm and 0.3-0.075 mm). The dried sand samples were studied using odometer instrument with simultaneous measurement of load and stain level. The stress range was 0-15 kPa. Each sample was loaded and unloaded while measuring primary wave speed and AE activity (number of hits) at each loading/unloading stage. The resonance frequency of ultrasonic sensors was 75 kHz, while measurement of AE was restricted by digital filtering in the range 300-500 kHz to avoid the effect of ultrasonic wave excitation on the AE signal. The experimental results show that the increase of stress level causes the rise of p-wave speed in the range of 514-630, 490-624, 521-637, 476-563 m/s for natural dune sand of 2.36-0.6, 0.6-0.3, 0.3-0.075 mm fractions, respectively. Note that the coarser the sand particle size, the more intense the non-linear response to sand unloading. Analysis of the wave velocity vs. the change in deformation shows a gradual increase in the p-wave velocity value with increasing deformation, as well as a sharp decrease with relaxation of deformation (unloading branch). The analysis of AE behavior indicates gradual increase of the AE activity with increase of stress and strain levels for all studied samples, while a minor AE activity during samples unloading is also observed. Finally, one can see the difference in the behavior of the two elastic parameters. In the stress increase branch: gradual increase in p-wave speed and sharp excitation of AE activity. In the stress relaxation branch: abrupt decrease in p-wave speed and minor excitation of AE signals.
sciforum-034512	Multi-parameters approach for damage propagation analysis in Fiber Reinforced Polymer Composites Claudia Barile , Caterina Casavola , Giovanni Pappalettera , Paramsamy Kannan Vimalathithan Submitted: 04 Aug 2020 Abstract: Show Abstract	Claudia Barile , Caterina Casavola , Giovanni Pappalettera , Paramsamy Kannan Vimalathithan	N/A		Show Abstract
The use of Carbon Fiber Reinforced Polymers (CFRP) has tremendously increased in the last decades due to their exceptional combination of reduced density and high mechanical strength, that makes them ideal in many advanced structural applications. Assessing damage evolution in CFRP is a very important task being, at the same time, very complicated due to the complex mechanical response of the composites. The acoustic emission technique (AE) is a non-destructive technique based on the recording of sound waves generated inside the material as a consequence of the presence of active defects. Proper analysis of the recorded waves can be used for monitoring damage evolution in many materials including composites. The acoustic track associated with the entire loading history of the sample or the structures is usually followed by using some descriptors such as the amplitude of the sound waves, the number of counts and so on. In this paper the acoustic emission in CFRP single lap shear joints will be monitored by using a multi-parameter approach based on the contemporary analysis of multiple features such as ASL, Initiation Frequency, Reverberation Frequency and so on to understand if a proper combination of them can be adopted for a more robust description of damage propagation in CFRP structures

Full List

Event Awards

We are pleased to announce that event awards are offered to the following authors and their papers:

Session	Title	Authors	Awards
Acoustics and Vibrations	Multi-parameters approach for damage propagation analysis in Fiber Reinforced Polymer Composites	Claudia Barile Caterina Casavola Giovanni Pappalettera Paramsamy Kannan Vimalathithan	ASEC 2020 Best Paper Award
Nanotechnology and Applied Nanosciences	Ab-initio wave packet dynamical simulation of defects in 2D materials	Geza I. Mark Peter Vancso	ASEC 2020 Best Paper Award

We are pleased to announce that the ASEC 2020 Best Paper Award was granted to :

Multi-Parameters Approach for Damage Propagation Analysis in Fiber Reinforced Polymer Composites

By Claudia Barile, Caterina Casavola, Giovanni Pappalettera *, Paramsamy Kannan Vimalathithan

Ab-initio Wave Packet Dynamical Simulation of Defects in 2D Material

By Geza I. I. Mark *, Peter Vancso

The Awards

Best Paper Award

Number of Awards Available: 2

The Best Paper Awards are presented to the papers judged to make the most significant contribution to the conference. There are 2 quota for this award.

Sponsors and Partners

Media Partners

A. Optics and Lasers

Sub-Session:

Information Optics

Sub-session chairs：

Prof. Yaping Zhang
Faculty of Science, Kunming University of Science and Technology, No. 727, Jingming South Road, Chenggong District, Kunming, Yunnan, 650500, P. R. China

Prof. Liangcai Cao
Department of Precision Instruments, Tsinghua University, Beijing, 100084, P. R. China

Prof. Hiroshi Yoshikawa
Department of Computer Engineering, Nihon University, Chiba 2748501, Japan

Session Chair

Prof. Dr. Ting-Chung Poon, Bradley Department of Electrical and Computer Engineering, Virginia Tech, Blacksburg, Virginia 24061, USA

Show all published submissions (4) Hide published submissions (4)

Submissions

List of Papers (4) Toggle list

B. Nanotechnology and Applied Nanosciences

Sub-Session:

2D Materials

Sub-session chair：

Prof. Dr. Philippe Lambin
Physics Department, University of Namur, Rue de Bruxelles 61, B-5000 Namur, Belgium

Session Chair

Prof. Dr. Philippe Lambin, Physics Department, University of Namur, Rue de Bruxelles 61, B-5000 Namur, Belgium and Physics & Technology Department, Higher Pedagogical Institute, Bukavu, Democratic Republic of Congo

Show all published submissions (5) Hide published submissions (5)

Submissions

List of Papers (5) Toggle list

C. Energy

Session Chair

Prof. Dr. Frede Blaabjerg, Department of Energy Technology, Aalborg University, Aalborg 9220, Denmark

Show all published submissions (3) and accepted abstracts (2)

Submissions

List of Papers (3) Toggle list

List of Accepted Abstracts (2) Toggle list

D. Materials

Session Chair

Prof. Dr. Amit Bandyopadhyay, School of Mechanical and Materials Engineering, Washington State University, Pullman, WA 99164-2920, USA

Show all published submissions (5) Hide published submissions (5)

Submissions

List of Papers (5) Toggle list

E. Chemistry

Session Chair

Professor Sam Adeloju, Faculty of Science, Charles Sturt University, Wagga Wagga, NSW 2650, Australia

Show all published submissions (3) Hide published submissions (3)

Submissions

List of Papers (3) Toggle list

F. Acoustics and Vibrations

Sub-Session:

1. Acoustic Methods in Building Materials for Degradation and Repair Assessment

2. Elastic Wave Methods for Non-Destructive Damage Diagnosis in Composite Materials

3. Acoustics and Vibrations Analyses of Materials at Different Scales: Experimental and Numerical Approaches

Sub-session chairs：

a. Prof. Dr. Eleni Tsangouri
Department of Mechanics of Materials and Constructions, Vrije Universiteit Brussel, Belgium

b. Dr. Anastasios Mpalaskas
University of Ioannina, Greece

a. Dr. Mathias Kersemans, Ghent University, Belgium

b. Dr. Kalliopi-Artemi Kalteremidou, Vrije Universiteit Brussel, Belgium

Prof. Dr. Giuseppe Lacidogna, Politecnico di Torino, Turin, Italy

Session Chair

Prof. Dr. imitrios G. Aggelis, Department of Mechanics of Materials and Constructions, Vrije Universiteit Brussel, Pleinlaan 2, Brussels 1050, Belgium

Show all published submissions (20) Hide published submissions (20)

Submissions

List of Papers (20) Toggle list

G. Applied Biosciences and Bioengineering

Session Chair

Prof. Dr. Roger Narayan, Department of Materials Science and Engineering, North Carolina State University, Raleigh, USA

Show all published submissions (7) Hide published submissions (7)

Submissions

List of Papers (7) Toggle list

H. Environmental and Sustainable Science and Technology

Session Chair

Prof. Dr. Dibyendu Sarkar, Stevens Institute of Technology, Department of Civil, Environmental, and Ocean Engineering, Hoboken, New Jersey, United States

Show all published submissions (12) Hide published submissions (12)

Submissions

List of Papers (12) Toggle list

I. Applied Physics

Sub-Session:

1. Applications to Biophysics and Medical Physics

2. Applications to Astrophysics and Plasma Physics

Sub-session chairs：

1.

a. Dr. Francesco Dell’Olio
Department of Electrical and Information Engineering, Polytechnic University of Bari, Italy

b. Dr. Luigi La Spada
Lecturer in Electrical and Electronic Engineering, School of Engineering and the Built Environment Edinburgh Napier University, 10 Colinton Rd, Edinburgh EH10 5DT, United Kingdom

2.

Dr. Gabriele Cristoforetti
Istituto Nazionale di Ottica (INO) - CNR, Area della Ricerca di Pisa, Via G. Moruzzi 1, 56124 Pisa, Italy

Session Chair

Prof. Dr. Nikolaos Vassiliou Sarlis, Section of Condensed Matter Physics, Department of Physics, National and Kapodistrian University of Athens, Panepistimiopolis, Zografos 15784, Greece.

Show all published submissions (1) Hide published submissions (1)

Submissions

List of Papers (1) Toggle list

J. Computing and Artificial Intelligence

Sub-Session:

1. Machine and Deep learning

2. Natural Language Processing

3. Social Computing

4. Multi-Agent Systems

5. Other Applications and Methods of Artificial Intelligence

Session Chairs

Prof. Dr. Andrea Prati, Department of Engineering and Architecture, University of Parma, Italy

Prof. Dr. Carlos A. Iglesias, Intelligent Systems Group, Universidad Politécnica de Madrid, 28040 Madrid, Spain

Show all published submissions (8) and accepted abstracts (1)

Submissions

List of Papers (8) Toggle list

List of Accepted Abstracts (1) Toggle list

K. Applied Dentistry

Session Chair

Prof. Dr. Gianrico Spagnuolo, Department of Neuroscience, Reproductive and Odontostomatological Sciences University of Naples "Federico II", Naples, Italy

Show all published submissions (7) Hide published submissions (7)

Submissions

List of Papers (7) Toggle list

1st International Electronic Conference on Applied Sciences

Part of the International Electronic Conference on Applied Sciences series

10–30 Nov 2020

Thank You for Participating

All participants of ASEC 2020 are welcome to submit the extended work to the Applied Sciences.

Welcome from the Chair

Conference Secretariat

Call for Paper

Conference Chairs

Conference Committee

Sessions

Instructions for Authors

List of accepted submissions (75)

Event Awards

The Awards

Sponsors and Partners

Sponsors

Media Partners

A. Optics and Lasers

Submissions

B. Nanotechnology and Applied Nanosciences

Submissions

C. Energy

Submissions

D. Materials

Submissions

E. Chemistry

Submissions

F. Acoustics and Vibrations

Submissions

G. Applied Biosciences and Bioengineering

Submissions

H. Environmental and Sustainable Science and Technology

Submissions

I. Applied Physics

Submissions

J. Computing and Artificial Intelligence

Submissions

K. Applied Dentistry

Submissions

**All participants of ASEC 2020 are welcome to submit the extended work to the Applied Sciences.**